DCMA Blue List Basics for Thermal Imaging Users and Suppliers

Thermal imaging suppliers pursuing government contracts or contracts with critical infrastructure industries need to understand how their products are impacted by the US Government’s push for a trusted supply chain.

Posted on: 18 November 2026 | 2:09 pm

Ladder Safety - Part 2

For many thermographers, ladders provide a means for accessing remote areas and equipment. In this week’s Tip we cover safety tips applicable to extension ladders.

Posted on: 16 November 2026 | 11:03 am

Ladder Safety - Part 1

For many thermographers, ladders provide a means for accessing remote areas and equipment. Taking the time to use ladders properly can help to prevent serious or fatal injuries.

Posted on: 9 November 2026 | 11:10 am

Autumn IR Inspections to Assess Roof Condition

With parts of the US experiencing record setting heat, it is hard to think about winter. For many, autumn provides a perfect opportunity to conduct infrared inspections of flat roofs to help ensure that they are ready for the upcoming colder months.

Posted on: 2 November 2026 | 11:23 am

Using an IR Imager to Monitor Drywall Installation

Finishing drywall is a routine part of commercial and residential construction. A thermal imager can be useful in helping to assess the drying process associated with newly-installed compound.

Posted on: 26 October 2026 | 10:12 am

Applying Thermography

Thermography is a versatile nondestructive test technique that has a wide variety of applications. In short, thermography can be applied to any situation where knowledge of heat patterns and associated temperatures across a surface will provide meaningful data about a system, object, or process.

Posted on: 19 October 2026 | 10:26 am

Infraspection Institute Announces Student Scholarship Program

Burlington, NJ - October 15, 2026 - Infraspection Institute announced today the launch of its new Emerging Scholarship Program. The program is designed to encourage young people to explore infrared thermography and introduce them to career opportunities within the growing infrared industry.

Posted on: 15 October 2026 | 12:06 pm

How to Calculate Emittance

Utilizing correct emittance values is imperative for accurate non-contact temperature measurements. Knowing how to accurately calculate emittance values can help to ensure the accuracy of infrared temperature measurements.

Posted on: 12 October 2026 | 9:47 am

Defining Ambient Temperature

Ambient temperature is a term which appears in nearly all thermographic reports. However, many thermographers define ambient differently. Some define it as room air temperature while others define it as the temperature inside of the component enclosure.

Posted on: 5 October 2026 | 10:22 am

Defensible Aerial Thermal Evidence

Almost every week, I get an email asking me to review someone’s aerial thermal inspection.  Commercial roof. Storage tank.  Photovoltaic array.  Building envelope. Sometimes a flare stack or a substation bushing.  The assets change.  The question doesn’t.

Posted on: 1 October 2026 | 12:29 pm

Infrared Inspections of Arc Fault Circuit Interrupters

Excess heating is often a sure sign of defective electrical equipment; however, the absence of heat can also be a sign of component failure. In this Tip, we demonstrate how thermal imaging may be used to detect defective Arc Fault Circuit Interrupters.

Posted on: 28 September 2026 | 10:47 am

Understanding Imager Resolution

Resolution is one of the most important objective specifications for a thermal imaging system. Due to a lack of standardization, this term is used in a variety of ways, many of which can be confusing or misleading.

Posted on: 20 September 2026 | 10:24 am

Infraspection Institute Announces New Certification Course

Infraspection Institute announced today a new Level I certification course for infrared thermographers.

Posted on: 14 September 2026 | 10:53 am

IR Inspections of Electric Motors

Despite the important role they play in a commercial facility, electric motors tend to be both out-of-sight and out-of-mind until they fail. Infrared thermography can be used as a cost-effective diagnostic tool for detecting problems within electric motor systems.

Posted on: 14 September 2026 | 10:52 am

Gauging Solar Loading

Did you know that an automobile can be used to gauge solar loading? Under the correct conditions, a parked car can serve as a cheap, but effective, pyranometer.

Posted on: 7 September 2026 | 10:34 am

School’s Open – Drive Carefully

By early September, over 55 million children across the United States will head back to school. With 13 percent of those children typically walking or biking to their classes, drivers should be especially vigilant for pedestrians before and after school hours.

Posted on: 31 August 2026 | 10:38 am

How to Deal With Emittance

The perpetual question among those using radiometric equipment is, “What emittance value should I use?” In this Tip, we address several options for providing emittance values.

Posted on: 24 August 2026 | 10:37 am

Understanding Emissivity

Emissivity refers to an object’s ability to radiate infrared energy. Because infrared instruments measure radiant energy, it is imperative for a thermographer to understand emissivity and how it can vary.

Posted on: 17 August 2026 | 1:51 pm

Thermal Imagery to Detect Roof Fasteners

Thermal imaging is a proven technique for detecting latent moisture within low-slope roofing systems. Under the right conditions, thermal imaging may also indicate the number and location of roof fasteners.

Posted on: 10 August 2026 | 10:56 am

Infrared Inspections to Detect Latent Moisture

As interest in building remediation has increased, thermography has become a common tool for helping to detect moisture damage. Knowing when and how to conduct an infrared inspection is key to success.

Posted on: 3 August 2026 | 10:08 am

Infrared Inspection of Capacitors

Capacitors are devices commonly found in AC electrical distribution systems where power factor correction is required. Like any electrical component, capacitors need to be regularly checked for proper operation.

Posted on: 27 July 2026 | 10:09 am

16 Thermographers Earn Level I Certification

Sixteen thermographers successfully completed Infraspection Institute's Level I Certified Infrared Thermographer training course held last week at Mercer County College.

Posted on: 20 July 2026 | 6:45 pm

Frequency of IR Roof Inspections

The benefits of thermography for condition assessment of insulated roofs are well documented. Performed on a regular basis, infrared thermography can help to extend the overall life of a roofing system when utilized as part of a preventive maintenance program.

Posted on: 19 July 2026 | 9:58 am

Measuring Motor Temperatures

Temperature can be an indicator of the condition of installed electric motors; however, the best location for measuring temperature is often debated. In this Tip we discuss the best location for measuring motor temperatures.

Posted on: 13 July 2026 | 10:01 am

The Importance of Visual Inspections During Infrared Inspections of Electrical Systems

You’ve probably heard the saying, “You can’t see the forest because of all the trees.” Sometimes thermographers can’t see visible discrepancies for the thermal imagery.

Posted on: 6 July 2026 | 10:04 am